84
Description
G-30-1607-en
OPMI® VARIO on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 30. 01. 2009
Instrument tray (option)
The S88 floor stand and the S88 floor stand with lifting column an be
equipped or retrofitted with an instrument tray. In the case of retrofitting,
our service staff or an authorized person will install the instrument tray on
your suspension system.
The instrument tray (1) can carry a maximum of 13 kg. The tray has been
designed, for example, for mounting MediLive Trio from Zeiss:
The MediLive Trio is attached to the instrument tray with the aid of two
stud bolts. (The four receptacles supplied with the instrument tray are not
required for mounting MediLive Trio.)
A second MediLiveTrio or other accessory equipment can be mounted on
the instrument tray using the strap provided. Please note the instrument
tray's maximum load capacity of 13 kg.
Warning!
•
Make sure that the accessory equipment is positioned as securely as
possible on the instrument tray.
•
Mount MediLive Trio on the instrument tray using the two stud bolts.
•
If required, secure further accessory equipment on the tray using the
strap provided.
•
Do not place a load of more than 13 kg on instrument tray (1).
•
Remember there is a risk of collision and crushing when suspension
arm (2) is folded to its moving position. A "Risk of crushing" warning
label is therefore attached on the left and right of suspension arm (2).
•
Please read the relevant user manual before starting up the accessory
equipment.
•
Never pull or push at the accessory equipment (3) in order to move the
S88 floor stand. Always use handle (4) to move the S88 floor stand.
