74
Description
G-30-1607-en
OPMI® VARIO on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 30. 01. 2009
Display field with control keys
The display and control panel is integrated in the control unit.
The surgical microscope on the suspension system can be controlled ei-
ther manually or electronically. The control software required for elec-
tronic control is installed in the electronics box of the suspension system.
You operate the software via the control and display panel, where you can
read off and reconfigure the current settings.
The control and display panel is structured as follows:
– Three display fields (LCD) with the associated keys "
∇
" and "
Δ
".
– One row of keys comprising the MODE, STORE and MANUAL keys,
and a yellow LED above the MANUAL key.
User interface
The user interface of the suspension system comprises three display
fields and keys located beside and below them.
A pair of keys "
∇
" and "
Δ
" has been assigned to every display field for
making the appropriate settings.
The control functions have been combined in several modes (menu
pages). The basic mode is always displayed in the normal operating
status.
The following is displayed in the basic mode:
– the current lamp brightness of lamp 1 (xenon) in the upper display
field,
– Xe for xenon in the middle display field,
– the current user ID in the lower display field.
Key row
Three keys and an LED are provided below the display fields.
Use the "MODE", "STORE" and "MANUAL" keys to select the different
control functions (modes).
"MODE" key and "STORE" key
The "MODE" and "STORE" keys permit you to access the different modes
of the user interface. For details, please see the chapter "Operation".
"STORE" key
Use the "STORE" key to save the current focus and zoom settings.
MODE
STORE MANUAL
USER
1
1
1.5
Xe
Basic mode
