Zeiss OPMI PRO magis, Instructions For Use Manual

Page: 48 / 64

48
Maintenance / Further information
G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
Trouble-shooting table
•
This instrument is a high-grade technological product. To ensure opti-
mum performance and safe working order of the instrument, its safety
must be checked once every 12 months. We recommend having this
check performed by our service representative as part of regular main-
tenance work.
If a failure occurs which you cannot correct using the trouble-shooting
table, attach a sign to the instrument stating it is out of order and con-
tact our service representative.
OPMI
®
PRO magis Surgical Microscope
Problem Possible cause Remedy See
No function at all. Suspension system
switched off.
Switch on suspension
system. –
Line power failure. Contact in-house electri-
cian. –
Surgical field illumination in-
operative. Illumination system of sus-
pension system switched
off. Switch on illumination
system of suspension
system. See user's manual
for suspension system. –
Defective lamp. Change the lamp. See
user's manual for suspen-
sion system. –
Light guide not properly in-
serted in lamp or micro-
scope. Insert light guide as far as it
will go. –
Lamp module on suspen-
sion system has no contact. Insert lamp module as far as
it will go. –
Failure of electronics. Illuminate surgical field
using an OR illuminator.
Contact service dept.
–