Zeiss OPMI PRO magis, Instructions For Use Manual

Page: 20 / 64

20
Description
G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
Controls, displays, connections
1 Cable and light guide clip
2 Securing screw
3 Microscope shaft
4 Axis of microscope rotation
A magnetic brake clamps the axis of rotation as soon as you let go of
the release keys for the magnetic brakes.
5 Adjusting knob
for setting the friction of the microscope's axis of rotation.
6 Knob for balance setting of the front-to-back tilt motion
Use this knob to balance the front-to-back tilt motion. The balancing
procedure is described in the chapter: "Operation/Balancing the sur-
gical microscope".
7 Adjusting knob
for setting the friction of the microscope's front-to-back tilt motion.
8 Knob for balance setting of the lateral tilt motion
Use this knob to balance the lateral tilt motion. The balancing proce-
dure is described in the chapter: "Operation/Balancing the surgical
microscope".
9 Adjusting knob
for setting the friction of the microscope's lateral tilt motion.
Warning!
Before removing the microscope or changing any microscope equip-
ment, make sure to tighten the knobs (7) and (9).