Zeiss OPMI Pentero, Brief Instructions

Page: 17 / 40

G-30-1702-en OPMI® Pentero® Software Release 2.2 Issue 2.0
Printed on 17. 03. 2008
17
Mounting the tube and eyepieces
Warning!
Change the modules and accessories before surgery and without the pa-
tient!
• Loosen securing screw (8) by a few turns.
• Remove cover (4).
• Attach spine adapter (3) to the microscope body and firmly tighten se-
curing screw (8).
• Attach binocular tube (2) to spine adapter (3) and firmly tighten secur-
ing screw (7).
• Insert widefield eyepieces (1) as far as they will go in the mounts pro-
vided on the binocular tube.
• Attach binocular coobservation tube (5) to the microscope body and
firmly tighten securing screw (9).
• Insert widefield eyepieces (6) as far as they will go in the mounts pro-
vided on the binocular tube.
• Before starting up the system, remove protective cap (10) from the ob-
jective.
Warning! Check that all modules are securely seated. Firmly tighten se-
curing screws (8) and (9)! Balance the surgical microscope, page 9.
G-30-1458
9 7 8
1 5 5 6 3 2 2 4
10