Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 44 / 184

Device overview OPMI Lumera i
Version 8.0
Page 44 G-30-1720-en
Components on the suspension system
The suspension system is used to position and control the microscope.
It comprises the following components:
1 Suspension arm
with lamp housing. When the suspension arm is moved forward,
the surgical microscope is located in the park position. In this position,
the light turns off and the OPMI is reset to the user-specific start values,
e.g., XY or focus reset (see Page 122).
2 Support arm
with control panel, display (5.7" control panel) and connector panel for
power supply, foot control panel, data transfer, etc.
3 Stand column
with supports for cables and foot control panel.
4 Stand base
with four casters for moving the entire system.
Fig. 10: Components
of the stand
1
2
3
4