Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 139 / 184

Version 8.0
G-30-1720-en
Page 139
OPMI Lumera i Care and maintenance
Safety check
To prevent any impairment of the system’s safety as a result of aging, wear
etc., the operating company must ensure, in accordance with the applicable
national regulations, that the regular technical safety checks defined for this
device are performed on schedule and to the stipulated extent.
The safety checks must be performed only by the manufacturer or qualified
personnel.
At a minimum, the following safety checks should be performed on the system:
– Availability of the Instructions for Use
– Visual inspection of the device and accessories for damage, as well as
legibility of the labels
– Leakage current test
– Test of protective ground conductor
– Function and wear test of the steerable casters and locking tabs
– Function test of all switches, buttons, sockets, and indicator lamps of the
device
– Function test of the Manual mode without the patient, at least semi-
annually
CAUTION Risk of injury without safety inspection!
Hazards and device deficiencies will not be detected in time and can have
a negative effect on patients, users, or others.
• Have a safety inspection in compliance with IEC 62353 performed on
time and to the prescribed extent. At the same time, be sure to comply
with the relevant national regulations.