Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 121 / 184

Version 8.0
G-30-1720-en
Page 121
OPMI Lumera i Operation
System settings
The “System Settings” menu enables you to make the following settings:
– Configuring XY reset button
– Configuring standby position
– Configuring system options
– Optical settings
– Network (optional)
– Versions
– FCP pairing (optional)
– Setting speeds
Configuring XY reset button
You can select the functions to be reset to their initial values when XY reset
button (1) is pressed. The settings are saved for the specific user.
• Select <System Settings><XY Reset> in the main menu.

The submenu “XY Reset” is displayed.
CAUTION Risk of collision!
Pressing the reset button (1) moves the X-Y coupling into its configured
starting position and/or moves the focus into the center position. This may
cause injury to the patient or damage to mounted accessories.
• Maintain a sufficient distance between the device and the patient (minimum
40 mm) when pressing the XY reset button (1).
• Ensure that attached accessories may not come into contact with other
objects.
1