Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 105 / 184

Version 8.0
G-30-1720-en
Page 105
OPMI Lumera i Operation
Light source
The “Light” menu offers you the following functions:
– Switching the light source on/off
– Selecting the brightness of the light source and defining a start value.
Switching the light source on/off
The light source is always off after the system has been started. Use the 5.7"
control panel or the foot control panel to turn the light source on or off.
• Press the <Light> button in the main menu.

The “Light” menu is displayed.
• Press the <Light On/Off> button.

The light source is on when the button is highlighted in dark blue color.
CAUTION Damage to the eye caused by high light intensity!
Too much light intensity (brightness) or excessive radiation exposure times
may lead to retinal injury in the patient’s eye.
• Adjust the illumination intensity as required for the selected type of
illumination and the radiation exposure time. You will find the values
recommended by ZEISS in the tables “Maximum radiation exposure
times” on Page 20.
• Only deviate from these limit values in medically justified cases (IEC 60601-1,
point 12.4.1).
• Note when changing the illumination intensity whether this adjusts the
default value. If this is not the case, reboot the system.