Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 56 / 178

Overview of devices OPMI Lumera
®
i on floor stand
Version 9.2
Page 56 G-30-1720-en
Control elements on the control and display panel
1 5.7 ″ control panel with touchscreen functionality
The 5.7 ″ control panel is the system’s central communication interface.
It enables the user to configure the settings of the microscope, the stand
(light source and camera, if provided), and the programmable buttons on
the foot control panel.
2 Switch for manual mode
for manual control of the major functions in the event of system failure
(see page 30).
3 Power switch
for switching the device on and off. When the device has been switched
on, the green lamp in the switch is lit.
The power switch additionally contains an automatic circuit breaker that
deactivates the system in the event of a short circuit.
Fig. 15: Control elements
on the control and
display panel
1
2
3