Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 151 / 178

OPMI Lumera
®
i on floor stand Device data
Version 9.2
G-30-1720-en
Page 151
Electromagnetic immunity for all ME equipment and systems
OPMI Lumera i is intended for operation in the electromagnetic environment
specified below. The customer or the user of the OPMI Lumera i device is
responsible for ensuring that it is operated in such an environment.
Immunity tests IEC 60601 test level Compliance level
Electrostatic discharge
(ESD) as per IEC 61000-4-2 ±8 kV
contact discharge ±8 kV
contact discharge
± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV
air discharge ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV
air discharge
Fast transient electrical
disturbances/bursts as per
IEC 61000-4-4 ±2 kV for
power lines ±2 kV for
power lines
±1 kV for
input/output lines ±1 kV for
input/output lines
Surge voltages/surges as per
IEC 61000-4-5 ±0.5 kV, ±1 kV
phase-neutral voltage ±0.5 kV, ±1 kV
phase-neutral voltage
±0.5 kV, ±1 kV, ±2 kV
phase-neutral to ground voltage ±0.5 kV, ±1 kV, ±2 kV
phase-neutral to ground voltage
Power frequency (50/60 Hz)
magnetic field as per
IEC 61000-4-8 30 A/m
50 Hz or 60 Hz 30 A/m
50 Hz or 60 Hz
Voltage dips, short interruptions,
and supply voltage variations as
per IEC 61000-4-11 0 % UT for 1/2 cycle
at 0°, 45°, 90°, 135°, 180°, 225°,
270°, and 315° 0 % UT for 1/2 cycle
at 0°, 45°, 90°, 135°, 180°, 225°,
270°, and 315°
0 % UT for 1 cycle
and
70 % UT for 25 cycles
Single-phase: at 0 degrees 0 % UT for 1 cycle
and
70 % UT for 25 cycles
Single-phase: at 0 degrees
0 % UT for 250 cycles 0 % UT for 250 cycles