Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 113 / 178

OPMI Lumera
®
i on floor stand Operation
Version 9.2
G-30-1720-en
Page 113
The horizontal factory settings are:
– Button I: focus
– Button G: zoom
– Button J: focus
– Button H: zoom
The vertical factory settings are:
– Button I: zoom
– Button G: zoom
– Button J: focus
– Button H: focus
Changing button assignment
•
Press the <Foot control> button in the main menu.

The “Foot control” menu is displayed.
•
Press the button whose function you want to change:

A list of the selectable functions is displayed. If several selectable func-
tions are available, a scroll bar is displayed. Use the arrow buttons to
scroll up and down.
•
Tap on the function to be assigned to the button.
•
Repeat these two steps until you have assigned the required functions to
all buttons or rocker switches of the foot control panel.
•
To save the changes, press the button.

The setting is saved for the specific user.
•
To return to the main menu, press the button.

The “Main menu” is displayed again.
Check the button assignment and the functions of the foot control panel
before each use.