Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 11 / 178

OPMI Lumera
®
i on floor stand Safety measures
Version 9.2
G-30-1720-en
Page 11
Key to symbols
We would like to inform you of the safety aspects that must be observed
when handling this device. This chapter contains a summary of the most
important information concerning matters relevant to instrument safety.
Hazard symbols
The following safety information has been incorporated into the instructions
for use. Please note this information and be particularly careful in these cases.
Information symbols
The following information symbols are used in these instructions for use:
– Lists

Requirement for an action
•
Prompt for an action

Result of an action
Additional information and tips.
These do not contain any warnings of hazards.
WARNING Indicates a hazard which may lead to
severe
or
fatal injuries
if precautions
are not followed.
CAUTION Identifies a hazard which may lead to
slight or moderate
injuries if precau-
tions are not followed.
NOTICE Identifies a hazard which may lead to
material damage
if precautions are
not followed.