Zeiss opmi lumera 700, Instructions For Use Manual

Page: 89 / 236

Instructions for Use 4 Installation
OPMI LUMERA 700 4.1 Safety during installation
G-30-1673-en - 14.0 - 2018-07-12 89 / 236
4 Installation
4.1 Safety during installation
CAUTION!
Risk of injury due to electrical current!
Connecting unrecognized, defective or non-permitted accessories
to live ports may result in electric shock.
u
Connect only recognized, functioning and permitted acces-
sories to live ports.
u
When configuring your ME system, please make sure to comply
with the requirements of IEC 60601-1:2005+A1:2012, chapter
16.
CAUTION!
Risk of injury due to electrical current!
As per IEC 60601-1, section 16.2, this device's power outlet is a
multiple electrical outlet intended for use with an ME system.
Connecting unrecognized, defective or non-permitted accessories
can lead to a reduced level of safety on the ME system.
u
Use the multiple electrical outlet only for accessories which are
part of the ME system or are compatible with the ME system.
u
Never connect auxiliary power strips or extension cords.
u
Do not exceed the maximum permissible electrical load of the
multiple electrical outlet.
NOTE
Setting up an ME system!
Anyone connecting auxiliary equipment to medical electrical
devices is a system configurer and, as such, is responsible for
compliance of the system with the system standards. Local legis-
lation has priority over the above normative requirements.
u
Connect only devices which are approved by ZEISS or demon-
strably comply with the applicable standards and directives
(e.g. IEC 60950:2005 for data processing equipment). In
addition, all configurations must meet the normative require-
ments for medical systems (see IEC 60601-1-1 or Section 16 of
the 3rd edition of IEC 60601-1).
u
If you have any questions, please contact your local dealer or
ZEISS Service.