Zeiss opmi lumera 700, Instructions For Use Manual

Page: 173 / 236

Instructions for Use 7 Operation
OPMI LUMERA 700 7.5 Daily operation
G-30-1673-en - 14.0 - 2018-07-12 173 / 236
2. Tap the [CALLISTO Connection] menu button.
ð
The "CALLISTO eye" menu will appear.
3. To transfer control to CALLISTO eye: tap the [Allow] button.
ð The following message will appear: "Info - The system is
enabled for remote control / Active connection x.x.x.x."
Result ü The control panel is locked. The device can only be
operated via the 14-function foot control panel, the
handgrips and the CALLISTO eye Panel PC.
7.5.11 Ending control via CALLISTO eye
The network connection to CALLISTO eye can be ended to return
control to the device.
Prerequisite þ Control of the device has been transferred to CALLISTO eye.
[
} 172]
Action 1. Tap the [Disconnect] button.
ð
The following message will appear: "Connection to
CALLISTO eye terminated. Current user data are being
loaded."
Result
ü
The user that was active on the surgical microscope before
the network connection was established will become active
again on the surgical microscope.
ü
Any change of user performed on CALLISTO eye is not
applied.