Zeiss opmi lumera 700, Instructions For Use Manual

Page: 153 / 236

Instructions for Use 7 Operation
OPMI LUMERA 700 7.5 Daily operation
G-30-1673-en - 14.0 - 2018-07-12 153 / 236
Doing this overwrites the existing user profile or surgery profile
(unless the factory default profile, "Default User", is currently
active). If you do not want to overwrite the current user profile or
surgery profile, you must first select and activate a different user
profile or surgery profile.
Temporary settings apply until the settings are modified or any of
the following actions are performed:
• Restarting the device
• Switching the user profile or surgery profile
• Placing the device in the park position (depending on the reset
options configuration)
• Pressing the XY reset button (depending on the reset options
configuration)
In all four cases, the microscope reverts to the settings specified in
the selected or active device settings.
7.5.1 Setting the illumination
The device detects which light source is installed and displays the
appropriate settings options. The sections below provide explana-
tions of the following light sources:
• SCI illumination
• Main light source (OPMI light)
• Auxiliary light source (2nd light source)
• Integrated keratoscope ring
• Integrated slit illumination
7.5.1.1 Setting the SCI illumination system
The SCI illumination [
}
81] system features three adjustable types of
illumination whose mix ratio can be retrospectively adjusted.