Zeiss opmi lumera 700, Instructions For Use Manual, Page: 121 / 236

Instructions for Use 5 Daily startup
OPMI LUMERA 700 5.3 Positioning the device in the OR
G-30-1673-en - 14.0 - 2018-07-12 121 / 236
5.3.4 Orienting the integrated CALLISTO eye Panel PC
1
2
3
Figure 70: Orienting the integrated CALLISTO eye Panel PC
1 Fixing lever 2 Monitor
3 Suspension arm
CAUTION!
Risk of crushing caused by moving parts!
Fingers may be crushed between the monitor and support arm.
u
Stay clear of the area between the suspension arm and the
monitor while the user terminal is in motion.
Action 1. Release the suspension arm by rotating the fixing lever to the
right.
ð
The suspension arm can be freely moved.
2. Swivel the support arm and the suspension arm into the
desired horizontal and vertical position.
3. Lock the suspension arm by rotating the fixing lever to the left.
ð
The suspension arm is locked.
4. Hold on to the upper corner of the user terminal and set the
desired viewing angle.