5 Daily startup
Instructions for Use
OPMI LUMERA 700
5.1 Outfitting the surgical and assistant's microscopes with accessories
108 / 236
G-30-1673-en - 14.0 - 2018-07-12
9. Adjust the parameters on the tube, objective lens and
10. Additional accessories can be installed on the underside of the
microscope. Refer to the accessory's Instructions for Use.
5.1.2 Connecting the Invertertube E
The electrical inverter on the Invertertube E is controlled by the
electrical connection. If the Invertertube is connected along with
the RESIGHT 700, both accessories are synchronized and the field
of view is always displayed in the correct orientation. This also
includes the image inversion of an integrated HD camera.
Material
• Invertertube E connection cable
• Cable clip
Prerequisite
þ
The Invertertube E is attached.
Action
1. Insert the Invertertube E connection cable into the surgical
microscope's Invertertube E connector.
2. For devices with assistant's microscope: follow steps 2 - 8.
Insert the Invertertube E connection cable into the assistant's
microscope's Invertertube E connector.
Summary of Contents for opmi lumera 700
