72
Preparations for use
G-30-1416-en
OPMI® 1FR XY Surgical Microscope on S7 Floor Stand
Issue 4.0
Printed on 14. 11. 2007
Relocating the unit
Note:
As the stand is very easy to maneuver, there is a tendency to underesti-
mate its weight. Therefore, move the stand slowly and carefully!
Please observe the following points when relocating the stand:
•
Turn off the unit at the power switch.
•
Unplug the power cord from the wall outlet.
•
Fold the suspension arm to its moving position (see illustration on the
opposite page).
•
Wind up the cable of the foot control panel on a cable bolt and hang
the foot control panel on the handle.
•
Wind up the power cord on the other cable bolt.
•
Use the maneuvering handle for moving the stand.
•
Be careful of heights when passing through doorways.
•
Avoid collisions of any kind.
•
Do not go over steps and edges: The stand might topple!
•
Be extremely careful when moving over slopes.
•
Do not park the stand on slopes.
•
Press at least two of the brake tabs and make sure that the stand is
no longer able to roll away by itself.