Zeiss MMZ M, Operating Instructions Manual

Page: 97 / 154

Safety during the measuring operation
61211-1270302 MMZ M
7-5
Safety during the measuring operation
Safety instructions
Ram collision protection
CAUTION
Risk of injury due to disabled collision protection.
If collision protection is disabled, personal injury may occur and the
CMM could be damaged.
—
Enable collision protection before starting the measuring operation.
Set-up work
Risk of injury due to travel movements at high speed. Therefore, any set-
up work in the danger zone of the CMM may be carried out only if spe-
cial precautionary measures have been taken.
CAUTION
Risk of injury due to travel movements in set-up mode.
Crushing and severing of body parts. Risk to the eyes caused by the
styli.
—
Set the MAN operating mode.
—
Withdraw the key and keep it with you. Ensure that nobody can
switch to the AUTO operating mode.
—
Reduce the maximum travel speed either via the control knob on
the control console or in the measuring software.
—
Always keep the control console within reach in order to be able to
press the
EMERGENCY STOP button in case of emergency.