Zeiss METROTOM 1500 G3, Operating Instructions Manual, Page: 96 / 120

Maintenance
9-2
61211-8140502 METROTOM 1500 G3 1.4
Maintenance
Maintenance
Purpose of maintenance work
Maintenance work serves the following purposes:
– Safety during the measuring operation
– Avoiding downtimes
– Measuring with the maximum accuracy
In order to guarantee these features in the long run, the CT scanner re-
quires regular maintenance.
NOTE
Maintenance work may only be carried out by authorized personnel.
These persons must have received special training on the corresponding
CT scanner qualifying them to carry out all necessary maintenance
work.
Maintenance agreement
We recommend concluding a maintenance agreement to guarantee reli-
able operation. ZEISS offers maintenance agreements relieving you of
any need to worry about maintenance.
– If you wish to subsequently conclude a maintenance agreement, call
our support team.
➤
See [
⇨
8-6]
Regarding maintenance work, a distinction is made between mainte-
nance of the X-ray system and extensive maintenance . The maintenance
of the X-ray system is the prerequisite for the operation of the CT sys-
tem.
Maintenance intervals
The time intervals between two maintenance calls depend on the de-
gree of utilization and on the X-ray components. See table.
NOTE
The specified maintenance intervals apply if the required environmental
conditions are met.
Non-observance of the maintenance intervals may lead to damage to
the CT system. This is the responsibility of the operator.