Zeiss METROTOM 1500 G3, Operating Instructions Manual, Page: 71 / 120

Start-up checklist
61211-8140502 METROTOM 1500 G3 1.4
6-13
Start-up checklist
Start of the CT system
– Has the CT system been started in the correct order?
See
➤
Starting the CT system [
⇨
6-6]
Loading door
– Have you initialized the loading door? See chapter »«.
User software
For the following operations, please refer to the METROTOM OS Operat-
ing Instructions.
– User software started?
– All X-ray components initialized?
Qualification and calibration
For the following operations, please refer to the METROTOM OS Operat-
ing Instructions.
– Have you calibrated the detector?
Calibrate the detector once a month.
– Have you qualified the geometry?
Qualify the geometry once a week.
– Have you qualified the axis?
Qualify the axis once a week.