Zeiss LSM 880, Operating Manual, Page: 515 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Center Screen Area / Image Containers - Display and Image Analysis ZEISS
10/2014 V_01 000000-2071-464 509
6.19.1 Access to RICS
If you have taken an image or an image series or have opened an old image or image stack, a click on the
RICS
tab of the
View
tab list will make the RICS functionality available.
The right column of the Image window will display the Fit table, the middle image the original intensity
image and the left one the computed correlation image using a default LUT (look up table) and a scale
bar for the correlation (Fig. 704). Below, the result table is displayed.
Fig. 704 RICS window with RICS register active
6.19.2 Control of View Functionalities
All required settings and manipulation for the RICS analysis can be called up with the View tabs. They
divide into
View
for image manipulation,
RICS
for correlation analysis and
2.5D
for display
functionalities. The View and 2.5D options are described at respective sites of the manual dealing with
image display. Here RICS functionalities are detailed.