Zeiss LSM 510 Manual Download Page 91

Page: 91 / 606

LSM 510

OPERATION IN EXPERT MODE

LSM 510 META

File Menu

Carl Zeiss

03/06

B 45-0021 e

4-29

If required, the filter features displayed in the work
box can be stored.

•

Click on the

Add to List

button. The

Add to

List

window will be opened.

•

Enter a name for the filter and click on

. The

filter will be included in the

Filter List

panel.

Filter List panel

All the stored filters are displayed in the

Filter List

panel and can be activated any time at a click of
the mouse.

•

Click on the name of the required filter. The
linked filter features will be displayed in the
work box.

Filters which are no longer needed can be deleted.

•

Click on the filter to be deleted in the

Filter List

panel.

•

Click on

Remove from List

. The filter will be removed.

4.4.3.9

On Filter Function

The

On Filter

function is a toggle switch to activate or deactivate selected filter settings.

4.4.3.10 Delete

Function

•

Select the images to be deleted from the image database.

•

Click on the

Delete

button. Confirm the safety inquiry then displayed by pressing

−

The images and the acquisition parameters will be removed from the image database.

Fig. 4-17

Add Filter to List window

Fig. 4-18

Filter List panel

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands