LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Display and Analysis of Images
Carl Zeiss
03/06
B 45-0021 e
4-305
4.13.24.5 Display
Modes
The three buttons in the
Display
button bar allow stacks to be displayed in the 2D, Iso-Lines or 3D
display mode.
(1) 2D
modes
The following 2D modes can be set:
Intensity
button: Display of projection of all intensities of the stack (black-and-white
display).
Height
button: Height coded color map with color bar in a separate parameter window
on the right hand side.
Gradient
button: Display of height gradient (slope), averaged pixelwise over all neighbors
(black-and-white display).
•
Click on the
2D
button in the
Display
button bar.
−
The 2D display mode selected last is activated. At the same time, an additional button bar is
displayed beside the
2D
button permitting selection of the required 2D display mode.
•
Select the required 2D display mode with a click of the mouse.
(2)
2D Iso-Lines display mode
Iso-Lines are lines which connect points of equal height on the topography.
The following 2D Iso-Lines display modes can be set:
Intensity
button:
Intensity
projection superimposed with colored iso-lines (lines of equal
height).
Height
button: Height function with black iso-lines.
Black
button: White iso-lines on a black background.
•
Click on the
Iso-Lines
button in the
Display
button bar.
−
The Iso-Lines display mode selected last is activated. At the same time, an additional button bar is
displayed beside the
Iso-Lines
button permitting selection of the required Iso-Lines display mode.
−
Below the
Measure
button bar, the
Line Dist.
and
Line Offset
sliders / input boxes are displayed.
•
Select the required Iso-Line display mode by clicking the left mouse button.
