Zeiss LSM 510 Manual Download Page 361

Page: 361 / 606

LSM 510

OPERATION IN EXPERT MODE

LSM 510 META

Display and Analysis of Images

Carl Zeiss

03/06

B 45-0021 e

4-299

4.13.24

Display - Topography for LSM

This optional function allows to

−

process, display and measure topographic information.

−

use frame Z Stacks

−

and frame Z Stacks over time

The

Topo

function is mainly used for applications in material research and industry.

The settings of

Chan

and

Zoom

are

applied. The settings of

Slice and Contr

are not applied. The

Palette

settings are applied in some 3D display modes.

Click on

Topo

will display the

Topography

toolbar. All changes done with this toolbar are effective

immediately. The content of the overlay plane is temporarily deleted while the toolbar is displayed.

•

Click on the

Topo

button. The

Topography

toolbar is displayed.

−

The topography of a Z Stack is displayed in the

Image Display

box of the

Image Display

window.

The parameter used at the last exit of the

Topo

function are applied.

Fig. 4-288

Image Display window, Topography display

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands