Zeiss LSM 510 Manual Download Page 358

Page: 358 / 606

OPERATION IN EXPERT MODE

LSM 510

DuoScan

Carl Zeiss

Display and Analysis of Images

LSM 510 META

DuoScan

4-296

B 45-0021 e

03/06

4.13.23.4 Appearance (Settings)

The

Appearance

button opens the

3D Rendering

window.

This window allows settings for

Light

Material

Background

and

Projection

properties to be

defined for

all

3D projection modes.

Depending on the selected 3D projection mode,
different setting parameters are displayed.

In the

Shadow

projection, the parameter

Roughness

is also available and can be set

between

and

A default setting is permanently available for all
modes.

If individual settings for 3D rendering are to be
used again, they can be stored and loaded when
required.

See

also

Show Processing Parameters

page 4-310.

Proceed as follows to save individual settings:

•

Click on the

Add to List

button.

•

Enter a name in the opening

Add Shading

Model to list

window.

•

Click on

−

The settings are saved and the entered name
appears in the

Shading Model List

selection box.

•

To activate the settings, double-click on the
relevant name in the

Shading Model List

selection box.

Settings which are no longer required can be
removed.

•

Select the name of the setting to be deleted
with a click of the mouse in the selection box
and then click on the

Remove

button.

−

The setting is deleted.

Fig.

4-284

3D Rendering window (e.g. Surface
Advanced rendering mode)

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands