Zeiss LSM 510 Manual Download Page 314

Page: 314 / 606

OPERATION IN EXPERT MODE

LSM 510

DuoScan

Carl Zeiss

Display and Analysis of Images

LSM 510 META

DuoScan

4-252

B 45-0021 e

03/06

All

When active it allows you to zoom all images of a gallery to the same extent
without changing the display image format.

Zoom-+, Zoom-–, Zoom 1:1

Zoom-Mouse and

All

can only be

defined when the

Zoom-Auto

function is deactivated.

Slider with display box

The zoom factor can be set by moving the slider. The display box below
displays the current zoom factor. Factor 1 corresponds to the original size.

4.13.5

Select - Slice

This function allows to select and view individual slices from a Z Stack or a time series, when images
where acquired in frame mode.

The button is grayed, when these conditions are not true.

Click on

Slice

will display the

Slice

toolbar. Any changes done with this toolbar are effective immediately.

•

Click on the

Slice

button in the

Select

toolbar.

−

The

Slice

toolbar is displayed on the right-hand side of the

Image Display

window.

•

If you click on the

Slice

button again, the

Slice

toolbar is removed.

Fig. 4-252

Image Display window; Select - Slice

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands