LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Acquire Menu
Carl Zeiss
03/06
B 45-0021 e
4-123
4.5.8.1
Open / Close the Stage and Focus Control Window
•
Click on the
Stage
button in the
Acquire
subordinate toolbar of the
Main
menu.
−
The
Stage and Focus Control
window appears on the screen.
•
Click on the
Close
button in the
Stage and Focus Control
window to close this window.
The following functions are available on the right-hand side of the
Stage and Focus Control
window:
Close
button
The
Stage and Focus Control
window is closed.
Start
button
Starts the tile scanning procedure.
Stop
button
Ends the scanning procedure.
4.5.8.2
Focus Position Panel
Focus buttons (Z Moves)
Clicking on the
▲
button moves the specimen
stage / nosepiece upwards.
Clicking on the
Z
button sets the current Z-position
to zero.
Clicking on the
▼
button moves the specimen
stage / nosepiece downwards.
Focus Step slider
0.1 µm is the smallest value which can be set, and 100 µm the highest.
•
Clicking on the arrow keys changes the step size by 1 µm.
•
Pressing the
CTRL
key and clicking changes the step size by 0.05 µm.
•
Pressing the
Shift
key and clicking changes the step size by 10 µm.
Work button
Pressing the
Work
button moves the specimen stage / nosepiece back to the Work position. This is the
position last set before the
Load
button was pressed.
Load button
Clicking on the
Load
button lowers the specimen stage / nosepiece to make it easier for you to change
the specimen (or objective).
Fig. 4-103
Focus Position panel
