Zeiss Lightsheet Z.1 Operating Manual Download Page 359

Page: 359 / 427

CHAPTER 4 - SYSTEM OPERATION

Lightsheet Z.1

Center Screen Area / Image Containers - Display and Image Analysis

Carl Zeiss

02/2013

000000-1790-528

189

4.2.3

Player

This function allows one to

−

animate frames of a Z-Stack or a time series

−

specify animation parameters such as range
and animation speed

When the image displayed in the

Image Display

window is neither a Z-Stack nor a time series, this

View Option control block is empty.

The

Player View Option

control block is controlled by the following elements:

The current position

slider is displayed in the View Option control block

Dimensions

and can also me moved manually or by entering the slice number into the input box.

The slider can be accessed only when the player animation is off.

Start

and

End

slider: The setting of the

Start

and

End

sliders limits the number of slices

to be used for the animation. Slices before

Start

and after

End

are not taken into the

animation. These sliders can be changed during automatic animation.

Starts the forward motion of the automatic animation. After the last slice has been
passed, restart is made at the first slice.

Starts backward motion of the automatic animation. After the first slice has been
passed, restart is made at the last slice.

Starts the combined forward / backward motion of the automatic animation, i.e. when

the last slice has been reached, the backward motion is activated and the forward
motion is activated again on reaching the first slice.

Stops the automatic animation.

Moves to the first slice.

Moves to the last slice.

Speed

can be set through a slider or spin-box (selection box).

Multidimensional

animations can be selected by ticking the individual dimensions tick

boxes.

Fig. 291

View Options control block - Player

Summary of Contents for Lightsheet Z.1












































































































































































































































































































































































































































Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands

Zeiss Lightsheet Z.1, Operating Manual

Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands