Zeiss Lightsheet 7, Installation Requirements

Page: 13 / 22

ZEISS 2 Requirements | 2.5 Safety and Radiation Information
Available and patched local area network
connected to ZEISS system PC RJ 45 connector for LAN
Security patched and measures according to
your local IT security standards e. g. antivirus software, installed and main-
tained by customer/operator
2.5 Safety and Radiation Information
2.5.1 Laser Safety
Under normal operation conditions, the Microscope System is classified as laser hazard Class 1
system. Under service conditions, the system is classified as Class 3B system. The operator of the
laser equipment is responsible for conformance with protective measures and safety require-
ments.
Laser safety measures in accordance with the applicable country-specific legal regulations remain
valid. As the responsible body, the operator is responsible for complying with laser safety regula-
tions.
The following types of lasers are currently intended for use. Using other lasers than indicated be-
low requires prior coordination with ZEISS. The performance values of the directly integrated mul-
tiphoton lasers correspond to the rated laser power.
Laser Wavelength (nm) Class Typical power ex
fiber (mW)
solid state laser (SSL) 405 3B 20
solid state laser (SSL) 405 3B 50
solid state laser (SSL) 445 3B 25
solid state laser (SSL) 488 3B 30
solid state laser (SSL) 488 3B 50
solid state laser (SSL) 515 3B 20
solid state laser (SSL) 561 3B 20
solid state laser (SSL) 561 3B 50
solid state laser (SSL) 638 3B 75
Tab. 2: Laser Data
as per EN 60825-1:2014
400 - 700 nm, max. 500 mW
AVOID EXPOSURE
TO BEAM
CLASS 3B LASER PRODUCT
WARNING
LASER RADIATION
Info
Observe instruction manuals of external lasers
Information on the external lasers is available in the documents provided by the laser manufac-
turer. Particularly observe the notes by the laser manufacturer.
Installation Requirements ZEISS Lightsheet 7 | en-US | Rev. 1 | 349500-8186-000 13