OPERATING INSTRUCTIONS
ZEISS
Switching on and off the Lattice Lightsheet 7 System
Lattice Lightsheet 7
70
000000-2324-960
04/2021 V_01
3.1.2
Presetting the System
3.1.2.1
Switching to Operation Mode (Obligatory)
After initialization, the ZEN Lattice Lightsheet GUI in
startup mode is displayed. The
Imaging Setup
tab
(Fig. 47) displays:
To add first track, click the
respective button
. Press either of these buttons to
obtain the ZEN Lattice Lightsheet GUI in operation
mode.
3.1.2.2
Selecting the Carrier (Obligatory)
Fig. 48
Sample carrier selection
If no sample carrier has been selected, the
sample carrier display window
will show
None
with a cross in
a triangle with red background. In this state it is not possible to run an experiment (The
Start Experiment
button is greyed out.). In order to select a sample carrier, press the
Select
button next to the
sample carrier
display window
and select the appropriate carrier in the
Select Template
menu.
Please ensure to have the right sample carrier format selected to avoid collision of sample carrier
and stage components!
Fig. 47
Imaging Setup tab at startup of
hardware