SAFETY INFORMATION
Lattice Lightsheet 7
Information Concerning the Use of the Device
ZEISS
04/2021 V_01
000000-2324-960
7
1.3
Information Concerning the Use of the Device
The Lattice Lightsheet 7 systems meet the EMC requirements for EN 55011 Class A (intended use in industrial
environment). If the system is operated in a residential area or in a small trade area other devices may be
influenced by conducted or radiated disturbance. In this case special EMC measures are required.
EMC test according to DIN EN 61326-1
1. Noise emission according to CISPR 11 / DIN EN 55011
2. Noise immunity according to table 2 (industrial sector)
In the rare case of a voltage surge on the wired data lines such as USB, LVDS, Sub-LVDS (e.g. from
indirect lightning stroke), a momentary interruption of the acquisition system's functionality is possible.
The imaging can stop or a short interruption of the camera image is possible. This is no defect.
Acquisition can be continued after restarting the ZEN software. Sample position is maintained and no
damage occurs to the system. A possible protective means to minimize the probability of a temporary
disruption is a transient voltage protector in your facility's power system.
