1.2
About This Manual
1.2.1
General Notes
This manual is the field service reference for troubleshooting, repair, adjustment, and calibration of
the IOLMaster
®
700. The manual is intended for use by field service engineers who have completed
ZEISS specific service training on the IOLMaster
®
700.
The service manual is designed to support Level 1 of a two-level service strategy. Level 1 (on-site)
field service employs modular replacement of printed circuit boards and other assemblies that are
most effectively repaired on site. This is the service strategy used in field service, and presented in
ZEISS training classes. Level 2 (workshop repair) include procedures which are not possible on-site or
where on-site repair was not successful.
for additional information regarding
the IOLMaster
®
700 service strategy.
The procedures in this manual assume that the reader is familiar with operation of the instrument.
Complete operating instructions are contained in the IOLMaster
®
700 User Manual. Information
presented in the user manual is not repeated in this service manual. The user manual can be ordered
separately as a standard ZEISS part.
Update revisions to this service manual will be issued by Service Bulletin, as required.
The general layout of the service manual is shown below. For greater detail, please refer to the Table
of Contents.
Service manual layout
Section 1 - General Information
Section 2 - Checkout and Preventive Maintenance
Section 3 - Parts Removal / Replacement
Section 4 - Adjustment and Calibration
Section 5 - Troubleshooting / Error codes
SM-30-4060
Confidential and Proprietary
Service Manual
Version 03, 2014-10-13
1 - 3
Order No. 2075-325