Zeiss INTRABEAM, Instructions For Use Manual

Page: 16 / 82

Safety measures INTRABEAM Water Phantom
Version 6.2
Page 16 G-30-1767-en
Symbols and labels
Please observe the warning labels and notices!
If you notice that any of these labels is missing or has become illegible on your
device, please contact ZEISS Service or an authorized representative of ZEISS.
You can obtain replacements.
2 "Observe the Instructions for Use" label
Observe the instructions for use or accompanying documents.
3 Equipment marking label
The equipment marking label contains the following information:
The technical data of the INTRABEAM Water Phantom can be found in the
section entitled "Device data" on page 72.
1 Product and device identification
This label contains the following information:
Date of manufacture
YYYY-MM-DD
UDI (Unique Device Identifier)
Device identification (DI) (01)04049539101785
Product identification (PI) (11)YYMMDD(21)663010XXXX
– Symbol for "manufacturer"
– Manufacturer (company name) Carl Zeiss Meditec AG
– Address of the manufacturer Goeschwitzer Strasse 51-52
07745 Jena, Germany
– Serial number 663010xxxx
– Product classification P30600001
– Device name INTRABEAM Water Phantom
– Reference number 304534-7000-600
– CE label
with identification num-
ber of the notified body
0297