Zeiss Humphrey II-i series, User Manual

Page: 68 / 580

General Operation
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
2-28
7
You may add a second line of text to the button to differentiate it
from other buttons. This line will appear below the name of the test.
If you want to add a second line of text, press YES when prompted.
Use the pop-up or external keyboard to type the additional informa-
tion. Both keyboards allow for the use of lower-case letters.
Examples of identifying remarks are “SITA Standard,” “SITA-SWAP,” or
“Dr. Brown’s Test.” Refer to the illustration at the start of
“Altering the
Main Menu Screen,” on page 2-26 to see an example of a Main Menu
screen displaying personalized test buttons with additional text.
Note: The Humphrey test pattern name (Central 24-2, C-40 Screening, etc.) cannot be altered.
8
Repeat this process for each button that you wish to change
9
Press EXIT when you are finished altering the Main Menu buttons.
Note: Buttons which have not been altered through the Alter Main Menu sequence will continue to
use standard testing parameters. Testing parameters which are changed via the CHANGE
PARAMETERS button during a particular test revert back to the parameters assigned to that button
once that visual field test is completed, unless you select TEST OTHER EYE.
Deleting a Button
1
Start at the System Setup screen. Select ALTER MAIN MENU.
2
Select DELETE A BUTTON.