Zeiss Humphrey II-i series, User Manual

Page: 62 / 580

General Operation
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
2-22
Setting Up Printing
Getting your printer set up to print is a three or four step process. The following instructions will
show you how to:
• Choose the Printer to print from • Set up a Shared Printer (optional)
• Set Default GPA Print Options • Choose the Print Destination and Options
Choose the Printer to Print From
1
Start at the System Setup screen. Touch the down-arrow of the
PRINTER drop-down box to select the printer for hard copy printouts.
Select PRINTREX, HP LASERJET, HP DESKJET, or SHARED. Selecting
SHARED selects the Shared Printer (see
“Set up a Shared Printer
(Optional),” on page 2-23 ).
Refer to “Printer,” on page 2-11 for additional information.
Set Default GPA Print Options
2
From the System Setup screen, select the PRINT SETUP button to
open the Print Setup screen that is shown on the left.
3
Select the DEFAULT GPA PRINT OPTIONS button to set and save
default GPA print options (if GPA is licensed on your HFA II-
i
). When
you select the PRINT FUNCTIONS icon from the Main Menu to print
GPA reports, these defaults will be selected.
Select the GPA reports you want by clicking in the button next to the
report so that an X is displayed in the button. For the first and last but-
tons, select the report from the drop-down menus. See
Chapter (8),
"Guided Progression Analysis (GPA)," for additional information about
Guided Progression Analysis.
4
Select DONE to save your default GPA print options and return to
the Print Setup screen.