Zeiss Humphrey II-i series, User Manual

Page: 220 / 580

File Functions
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
10-10
To review or change the search criteria as designated on the Disk Options screen, select DISK
OPTIONS. See
“Disk Options,” on page 10-5 and see Figure 10.2 .
When the directory order is set to Name or Patient (alphabetical searches), PATIENT SEARCH allows
you quickly to locate a specific test within the directory by entering a name on the popup keyboard.
When the directory order is set to Date, PATIENT SEARCH is replaced with DATE SEARCH and you
use the keypad to enter the desired date. In both cases, the search is limited to only those tests
meeting the search criteria in Disk Options.
SELECT ALL selects and puts a check mark next to every test in the directory. The SELECT ALL button
changes to SELECT NONE allowing you the opportunity to deselect all tests.

Note: Pressing SELECT ALL selects all the available tests, not just the seven (7) being
viewed on the screen.
After you have selected all the tests necessary for the File Function, choose PROCEED to execute the
function. A confirmation screen always will be presented noting how many tests have been selected
before any action takes place.
Figure 10.6 The File Directory – Sorted by Name
Abbreviations used on the File Directory screen to
identify test strategies include:
SS SITA Standard

SF SITA Fast

SSW SITA-SWAP

Thr Full Threshold

FP FastPac

Scr Screening

BY Blue-Yellow
The SET CURRENT RANGE feature allows you to tailor how you search for, display, and print
information. You can use this function to limit the total number of tests selected, thereby shortening
the amount of time required to perform many tasks. The Set Current Range feature is available when
performing Print functions, Printing to a File network operations, Patient Data functions and any File
Function other than DUPLICATE FLOPPY, INITIALIZE FLOPPY, or BACKUP/RESTORE.