Maintenance
17
626109-9160-000 FixAssist XTR Operating manual V1.0
5 Maintenance
Cleaning and maintenance work is only allowed to be carried out by
instructed personnel.
5.1
Cleaning and care
The FixAssist and the guides in particular must always be kept in a clean
state. The device must always be kept free of tools, liquids, chips and
other foreign substances.
Used substances and materials must be handled and disposed of
correctly, in particular when cleaning with solvents.
Basic requirements for all materials:
Dusty parts are damp-cleaned, never wipe in dry condition! It is necessary
to use a mild detergent and soft cleaning materials (cloth, sponge or
chamois leather).
The following are
not
allowed to be used:
– Abrasive agents or sharp/degreasing cleaning agents.
– Hard sponges or brushes.
– Chemicals such as acetone, carbon, carbon tetrachloride, methyl ethyl
ketone, paint thinners or alcohol compounds with an alcohol
concentration of more than 5%.
– Compressed air for cleaning by blowing out.
5.2
Maintenance
The FixAssist does not require any additional maintenance.
5.3
Service contact
Carl Zeiss 3D Automation GmbH
Carl-Zeiss-Straße 32
D-73431 Aalen
Germany
Tel.: +49 7361 6336-0
Summary of Contents for FixAssist XTR
Page 1: ...FixAssist XTR Probe presetting device for probe systems with XTR plate Operating manual...
Page 2: ......
Page 19: ......
