ZEISS
10 Technical Data and Conformity | 10.3 Declaration of Conformity
10.3 Declaration of Conformity
Denomination
Focused Ion Beam - Scanning Electron Microscope (FIB-SEM)
Model
Crossbeam 550/550L
Manufacturer
Carl Zeiss Microscopy GmbH
Carl-Zeiss-Str. 22
73447 Oberkochen
Germany
We declare under our sole responsibility that the above machinery and the optional accessories
fulfil all the relevant provisions of the following EC Directives:
§
2006/42/EC
– Machinery Directive
§
2014/30/EU
– Electromagnetic Compatibility
Applied harmonized standards:
§
EN ISO 12100:2010
– Safety of machinery – General principles for design – Risk assessment
and risk reduction
§
EN ISO 13849-1:2008
– Safety of machinery – Safety related parts of control systems –
Part 1: General principles for design
§
EN 60204-1:2006
– Safety of machinery – Electrical equipment of machines – Part 1: Gen-
eral requirements
§
EN 61010-1:2010
– Safety requirements for electrical equipment for measurement, control,
and laboratory use
§
EN 61326-1:2013
– Electrical equipment for measurement, control and laboratory use –
EMC requirements – Part 1: General requirements
CE Marking
The CE conformity marking is located on the type plate of the machinery or the optional acces-
sory, respectively.
Unauthorized modifications of the machinery or the optional accessory will cancel this declara-
tion.
Instruction Manual ZEISS Crossbeam 550L, Crossbeam 550 | en-US | Rev. 3 | 349500-8122-000
129
Summary of Contents for Crossbeam 550
Page 135: ......
