Zeiss Crossbeam 550, Instruction Manual

Page: 10 / 136

1 General Information | 1.2 Explanation on Warnings and Additional Information ZEISS
Text convention Meaning
Select Tools > Goto Control Panel > Air-
lock .
Follow a path in the software.
Text input
Text output
§
Text to be entered by the user
§ Text displayed by the system
Programming and Macros
Anything typed in literally during program-
ming, including, for example, macro codes,
keywords, data types, method names, vari-
ables, class names, and interface names.
Tab. 1: Text convention
Link type Meaning
See: Text Conventions and Link Types [
}
9] .
Link to further information for this topic.
https://www.zeiss.com/corporate/int/
home.html Link to a website on the internet.
Tab. 2: Link types
1.2 Explanation on Warnings and Additional Information
DANGER, WARNING, CAUTION, and NOTICE are standard signal words used to determine the lev-
els of hazards and risks of personal injury and property damage. Not only the safety instructions
and warnings in the
Safety chapter are to be considered but also the safety instructions and
warnings in other chapters. Failure to comply with these instructions and warnings can result in
both personal injury and property damage and involve the loss of any claims for damages.
The following symbols and warnings indicating dangerous situations and hazards are used in this
document.
DANGER
Type and source of danger
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING
Type and source of danger
WARNING indicates a potentially hazardous situation which, if not avoided, may result in
death or serious injury.
CAUTION
Type and source of danger
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
10 Instruction Manual ZEISS Crossbeam 550L, Crossbeam 550 | en-US | Rev. 3 | 349500-8122-000