49
Corona process | User Manual
Maintenance
Corona process
6
Aligning the Corona process
Caution
SENSITIVE COMPONENTS
Do not touch the white surface of the white standard with your fingers.
Protect the white standard from dust and contamination. When not in
use, cover with the supplied cover.
We recommend that you certify the white standard annually.
Insert the white standard in the standard holder at position
P6
.
Fig. 32 Mounting the white standard
Adjust the
Corona process
with the adjusting screws so that the light beam
is alligned to the center of the white standard.
When the
Corona process
has been successfully aligned, press the
OK
button.
Fig. 33 Confirming the alignment
This process may take a few seconds.
