35
Corona process | User Manual
Maintenance
Corona process
7 Maintenance
Note
In order to ensure optimal settings and smooth operation of your
measuring system on a long-term basis, we recommend concluding a
service and maintenance contract with ZEISS.
Please get in touch with your local ZEISS representative when ordering
spare parts or if service is required.
7.1 Cleaning and care
Warning
ELECTRICAL ENERGY HAZARD
Disconnect the Corona process measuring system from the power
supply completely before starting to clean it.
Caution
THERMAL ENERGY HAZARD
Let the Corona process measuring system cool down for at least
10 minutes before starting to clean it.
Follow the safety instructions for handling inflammable liquids and
solvents on the respective packages.
•
The
InProcess
control software has been shut down.
•
The power supply to the
Corona process
measuring system is completely
disconnected.
1
Clean the surface of the device with common solvent-free cleaning agents.
Persistent contamination can be removed cautiously with a detergent solution
or ethyl alcohol.
2
Clean the protective glass of the measuring system using a soft, lint-free cloth
moistened with distilled water or a special optical cleaner.
Requirements
Procedure
