29
Corona process | User Manual
System Operation
Corona process
5 System Operation
•
The components of the
Corona process
measurement system are completely
and properly installed and connected.
•
The required software packages are installed and the licenses are activated.
1
Establish the power supply for the
Corona process
measurement system.
2
Check the display of the Status LED on the
Corona process
.
When the
Corona process
measurement system has booted up completely,
the Status LED flashes
blue
in one second intervals.
blue flashing
after connection to the power supply
not illuminated
during initialization (max. 30 s) (no light beam
is visible in the measurement window)
blue flashing
after complete boot-up (no light beam is
visible in the measurement window)
3
Turn on your computer and start the
InProcess
software.
4
Select the service of the appropriate device (
Corona process
).
Fig. 12 Select service
Note
To permanently select a service (so that this selection window will no
longer appear), press the right mouse button and select the desired
service as the default value.
Requirements
Procedure
