Zeiss CONTURA, Operating Instructions Manual

Page: 93 / 158

Setting up the workpiece
61211-1310402 CONTURA
6-25
800
800
100
100
800
100
Size 12/24/Z
Procedure
Putting the workpiece down on the measuring table
Workpieces can be set down on the measuring table either manually or
by means of a lifting device.
Crane interlock Activate the »crane interlock« when using a lifting device to set down
workpieces on the measuring table. The crane interlock is an option
which requires additional hardware and software.
Heavy workpieces Heavy workpieces have a hard impact if they are lowered onto the mea-
suring table too quickly.
1 Lower heavy workpieces at a maximum speed of 2 mm/s.