Zeiss CONTURA, Operating Instructions Manual

Page: 15 / 158

General specifications
61211-1310402 CONTURA
1-3
CE marking
EC declaration of conformity as defined by Machinery
Directive 2006/42/EC Annex II, No. 1A
We hereby declare that by its design and construction and version we
placed on the market, the machinery named below complies with the
requirements set out in the EC Machinery Directive 2006/42/EC and in
the additional EU directives listed below.
If modifications are made to the machinery without our prior approval,
this declaration will no longer be valid.
Designation of the ma-
chine: Coordinate measuring machine
CMM type: CONTURA
Additional EU directives: – EMC Directive (2014/30/EU)
– RoHS Directive (2011/65/EU)
Applied harmonized stan-
dards, in particular: – EN 60204-1
– EN 61326-1 Table 2, Class A
– EN 61010-1
– EN ISO 12100
– EN 63000
The product bears the CE marking on its type plate.
Standards and regulations
The CMM has been designed, manufactured and tested according to
the following standards and regulations:
Regulations
– DGUV regulation 3:
Accident prevention regulations - electrical systems and equipment.
Standards
– EN (IEC) 61010-1:
Safety requirements for electrical equipment for measurement, con-
trol, and laboratory use.
– GB 4793.1:
Safety requirements for electrical equipment for measurement, con-
trol and laboratory use.