Zeiss CLARUS 500, Instructions For Use Manual

Page: 125 / 144

Instructions for Use 12 Accessories and User Replaceable Spare Parts
CLARUS 500 12.1 Parts Orders
2660021165005 Rev. A 2017-08 125 / 144
12 Accessories and User Replaceable Spare
Parts
This section contains parts lists for this instrument, instructions for
ordering parts and instructions for returning defective parts.
WARNING!
Using parts that are not authorized by ZEISS
may compromise device safety during operation.
u
Use only accessories authorized by ZEISS.
u
In the U.S., call 800–341–6968. Outside the U.S., contact your
local Zeiss distributor. You can find the ZEISS contact partner
for your country on our website: www.zeiss.com.
NOTE
The procedure for returning defective parts from Interna-
tional operations differs somewhat from that for U.S. domes-
tic operations
These differences are noted in the instructions.
u
Please follow the instructions carefully.
NOTE
Part numbers are subject to change
u
When ordering, confirm all part numbers with your ZEISS Rep-
resentative.
12.1 Parts Orders
12.1.1 U.S. Domestic Parts Ordering
Spare parts may be ordered as needed following established parts
ordering procedures. Parts needed overnight may be ordered by
phone from the Parts Department. The cost of shipping parts for
next day delivery is very high and should be used only in emergen-
cies. The Parts Department phone number is:
• 1-800-341-6968 (domestic toll-free)
• 1-925-557-4843 (domestic)
• 1-925-557-4652 (domestic fax)
12.1.2 International Service Operations
Customers are billed for shipping charges, including any customs
fees required.
For International Service Operations, please use the ordering proce-
dures that have been established for your area of operations, and
which meet the requirements of the Carl Zeiss Meditec Interna-
tional Parts Department.