Zeiss CLARUS 500, Instructions For Use Manual

Page: 104 / 144

6 Configuration Instructions for Use
CLARUS 500 6.7 Configure Capture Settings
104 / 144 2660021165005 Rev. A 2017-08
NOTE
Unprotected devices
may be at risk from unauthorized individuals.
u
Select and set the Password strength setting in the User man-
agement screen.
6.7 Configure Capture Settings
Select the Acquisition button on the Specific Settings tab to con-
figure acquisition settings.
Figure 21: Acquisition Settings
Setting Explanation
Show last captured
image for (x) seconds Sets how long (in seconds) an image is dis-
played after capture
Blink Fixation target
for (x) seconds Sets how long (in seconds) the fixation target
blinks when the operator selects the
Blink but-
ton on the Acquire screen
Autofocus Turns autofocus on by default
Reset to Factory De-
fault Returns all acquisition settings to the default
settings
6.8 Configuring Import and Export
Select Settings > Specific Settings > Import Export Settings to
configure import and export settings.
Setting Explanation
Export to FORUM If this setting is on, exam data is automatically
exported to FORUM at the configured fre-
quency