Zeiss CenterMax, Operating Instructions Manual

Page: 78 / 166

5-14
Preparations for start-up
61211-1020202 CenterMax Operating Instructions
Visual check
The visual check must be part of the routine work to be carried out
during the daily measuring operation.
Housing covers
The CMM may only be operated if all CMM housing covers are
mounted.
• Mount all housing covers before taking further measures.
Cable for power supply
The cable must be in perfect condition. It must not be ...
– ...bent or
– ...damaged.
• Make sure that the cable is in perfect condition.
• Ensure that no heavy objects are lying on the cable.
Compressed-air line
The line and connections must be in perfect condition. The line must
not be ...
– ...bent or
– ...damaged.
• Make sure that the line is in perfect condition.
• Make sure that ...
– no heavy objects are lying on the line.
– the line is connected correctly to the supply line and the CMM.
Cables
Cable duct
The cables from the control cabinet to the CMM are installed in a
cable duct.
• Make sure that the cable duct is not damaged.
NOTE