Image Acquisition
With the function
Load Factory Defaults
(context menu of the live image) you
can reset camera settings in addition to the settings for the live display:
Spot Meter / Focus Bar
No changes
Spot Meter
No changes
Live Speed
No changes
Auto Best Fit
Off (in case of color cameras), No changes (in case of
b/w cameras)
Auto Min/Max
Off (in case of color cameras), No changes (in case of
b/w cameras)
Display Curve
Full range
Gamma
0.45 (in case of color cameras), Linear (in case of b/w
cameras)
White balance
No changes (supplied in the driver)
Overexposure Off
Zoom
Fit into window
Ruler No
changes
Cross Bar
No changes
Live Staus bar
No changes
Close after Snap
No changes
péÉÉÇ=çÑ=íÜÉ=äáîÉ=áã~ÖÉ=
There are three speed modes available for the AxioCam MR live image. If you
use the pointer to click on the
icon at the bottom edge of the live
image, a pop-up menu with the possible setting options appears. The current
setting is displayed at the bottom edge of the live image. Each mode has its
own particular compromises.
Live mode
Description
Fast
Greatly reduced resolution, fast frame rate
Medium
Medium resolution, moderate frame rate
Slow
High resolution, slow frame rate
68
M 60-3-0014 e / printed 12.2008
